search

Massive Audio M8S Guía de usuario Pagina 13

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 32
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
    •
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 12
13
Bridged
5
6
Bridged
7
8
M8
Bridged
O On
Channel 5/6
Bridged Switch
Bridged
Switches
ON
Bridged
O On
Channel 7/8
Bridged Switch
Bridged
Polarity
NO CONNECTION
White Stripe
To Positive
Left
Speaker
Right
Speaker
16AWG Stranded
(minimum)
Speaker Wire
White Stripe
To Positive
Volume
Control
Bridged
Polarity
Diagram 8 M8 Bridged Mode Speaker Connections - Multiroom
SPEAKER CONNECTIONS
BRIDGED MODE SPEAKER CONNECTIONS
Bridged mode should be used for covering large areas or with
high powered speakers when additional power is required.
When using the M8 in bridged, (high power) mode, follow
the connection instructions in this section. For normal power
mode, see section: Normal Mode Speaker Connections.
CAUTION! Regardless of conguration follow the connection
instructions for normal and bridged power carefully. Failure to
do so can cause severe damage to the M8 and speakers. The
Procient Warranty does not cover this type of damage.
For example of bridged, high power speaker connections,
Channels 5-8 will be used. Diagrams 8/9
1. Use 16AWG (min) 2-conductor stranded speaker wire for
speaker connection. (Refer to the Speaker Wire Length
Chart for wire runs over 150’.)
2. Strip approximately 1/2 to 3/4 of an inch othe ends and
twist the strands together so there are no loose ends that
can cause shorts.
3. Loosen the Channel 5 Bridged - Speaker Terminal as
shown in Diagram 5 so there is enough room between
the post and the collar to feed the striped wire through
without damaging the strands.
4. Tighten the post to secure the wire.
5. Repeat for the appropriate Channel 5-8 bridged + and
- terminals. Bridged Channels 5/6 are the left channel,
Bridged Channels 7/8 are the right channel.
6. Conrm connection and polarity. Conrm again.
7. Connect the speaker wires to the appropr
iate left and
right + and - terminals on the volume control and speak-
ers (Diagram 8 - multiroom) or speakers (Diagram 9
- multizone) .
8. Conrm connection and polarity.
9. Set the
Channel 5/6 and 7/8 Bridged switches to the ON
position as shown in Diagrams 8/9. Failure to do so will
cause severe damage to the M8 and speakers. The Pro-
cient Warranty does not cover this type of damage.
10. Repeat Steps 2-9 for all other rooms/zones that are con-
gured for Bridged Mode.
Bridged
5
6
Bridged
7
8
M8
Bridged
O On
Channel 5/6
Bridged Switch
Bridged
Switches
ON
Bridged
O On
Channel 7/8
Bridged Switch
Bridged
Polarity
NO CONNECTION
White Stripe
To Positive
Left
Speaker
Right
Speaker
16AWG Stranded
(minimum)
Speaker Wire
White Stripe
To Positive
Bridged
Polarity
Diagram 9 M8 Bridged Mode Speaker Connections - Multizone
Vista de pagina 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Comentarios a estos manuales

Sin comentarios
  • Model Shipways Besta Clark Synthesis POSIFLEX Business Machines Zektop
  • Manhattan Tarjetas de sonido Kensington No Billy Goat Motor Dell Juegos de altavoces Samsung Las demostraciones públicas
  • Cook RCA Electrolux EHD8740FOK Electrolux EOB65300X Philips Grooming kit Electrolux EHF56747FK
  • Sony ICF-CD3iP Manual de usuario Samsung S22D390H Manual de usuario Electrolux EHS60210P Manual de usuario Panasonic KXTGM420 Instrucciones de operaciones